|
Trim the battens and top plinth flush to the uprights, using a...
|
After half-inserting screws into batten offcuts, fix the jigs ...
|
Bring the two uprights up against the screw guides in the top ...
|
Screw-fix the lowest batten 300mm from the obelisk's feet.
|
Similarly screw-fix a small offcut at the top to begin forming...
|
|
Screw-fix battens at 150mm intervals from the plinth to the lo...
|
Fit the two completed opposite sides in your jigs, and screw-f...
|
Set in the border, ensuring it is level. Here it is planted wi...
|
Work your way up the third side, and then repeat the process f...
|
Screw-fix the plinth and cap.
|
