|
A sink-style planter with alpine plants.
|
As you go, tamp the mix well down, again evenly on the inner a...
|
Mix the hypertufa: here 2 shovelfuls each of cement and sand t...
|
Add water until you have quite a wet mix, about the consistenc...
|
Cover the base of the larger box with a layer of mix. Cut a sh...
|
|
Here, we cut small lengths of roofing lath to make pegs. Inser...
|
Spread another layer of hypertufa mix over the base to sandwic...
|
Roughly pat down and smooth the base, brushing away any hypert...
|
After placing the smaller box inside the larger one, place obl...
|
Start to fill the sides with hypertufa mix, putting equal amou...
|
|
Once the mould is filled, support it on both sides with bricks...
|
The next day, remove the bricks and peel away the cardboard, b...
|
Before the hypertufa sets completely, scrape away the corners ...
|
Brush off the worst of the dust with a soft brush, and then go...
|
Leave to harden completely for about a week and then, using an...
|
